Dymondwood Turning Blanks and Pen BlanksDymondwood is a dense, warp-resistant material that finishes to a
high polish without stains or finishes. |
Dymondwood® is made from 1/16 hardwood veneers that are vacuum impregnated with dye
and phenolic resin. The veneers are layered and compressed under high pressure and
heat to slightly over half the original thickness. The result is a dense,
warp-resistant material that will finish to a high polish without stains or finishes.
It is hard and somewhat brittle and thus can chip or crack if proper techniques are
not followed. It will dull cutting tools faster than most average woods. You can
produce excellent results with your Dymondwood blanks by using a few special
techniques.  |
35 colors in stock. See Color Chart |
|
Standard and Jumbo (cigar) Pen Blanks available in two angle cut styles, our original shallow angle and typical regular angle, as well as straight cut. Angle cut available up to 2-1/4" square. Note: In pen blank sizes, straight cut stocked only in solid colors. Multi-colored pen blanks are available in straight cut only by special order in lots of 10. |
|
Standard and Jumbo (cigar) Pen Blanks are precut for immediate shipment. We are one of the few suppliers (the only?) to offer angle cut Dymondwood in sizes larger than pen blanks. |
|
Larger sizes in 1" x 1", 1-1/2" x 1-1/2", & 2" x 2" cross sections cut to order. *In these sizes only one angle cut style is available and will vary with length. Even larger blank cross sections are possible. |
|
We can custom cut many sizes to meet your needs for a variety of items such as knife scales, game calls (call blanks), perfume atomizers, bottle stoppers, rod handles, etc. |
|
Our original angle cut turning blanks are cut at a shallow angle, creating a unique look and a somewhat stronger blank. Our regular angle cut is a deeper angle, similar to the angle cut offered by most suppliers. We also offer all colors in straight cut. |
Available Angle Cuts |
|
|
 Shallow Angle Cut |
 Regular Angle Cut |
 Typical Pre-Drilled Blank |
Sample Products Made from Angle Cut Dymondwood |
|
|
 Dymondwood Fishing Lure |
 Dymondwood Crochet Hook |
 Dymondwood Magnifying Glass |
Dymondwood® Standard Pen BlanksDimensions: 5/8" x 5/8" x 5"All colors except as noted: (Quantity prices are figured on total number of any style Dymondwood pen blanks in your order.)
Quantity 1 to 9 blanks $2.39 each (standard size) # E Midnight Ebony Dymondwood: $4.19 each (any quantity)
|
Dymondwood® Jumbo (Cigar) Pen BlanksDimensions: 3/4" x 3/4" x 5-1/4"All colors except as noted: (Quantity prices are figured on total number of any style Dymondwood pen blanks in your order.)
Quantity 1 to 9 blanks $3.39 each (jumbo size) #E Midnight Ebony Dymondwood: $5.29 each (jumbo)
|
Dymondwood® Blanks in Other SizesPlease Note: In sizes 1 x 1 cross section and larger only straight and shallow angle is available.Prices apply to all colors except Midnight Ebony. If you don't see the size you need, email us for a quote at wood2@rrpwhite.com.
5/8" square cross section: 5/8" cross section available only in pen blanks (see above) and 30" lengths.
5/8 x 5/8 x 30" (straight or shallow angle)
$9.40 each. 1" square cross section:
Note: All 1" x 1" cross section is available only in quantities
of 4 (or multiples of 4) of the same color and same length.
1-1/2" square cross section: 1-1/2" cross section sizes available in any length from 2" up to 30". Only prices of the most common lengths are listed. Please contact us for pricing on lengths not listed.
1-1/2" x 1-1/2" x 6" - Straight Cut $7.32; Shallow Angle Cut $9.30 1-1/2" x 2-1/8" STRAIGHT Cut cross section: 1-1/2" x 2-1/8" straight cut cross section sizes available in any length from 2" up to 30". Only prices of the most common lengths are listed. Please contact us for pricing on lengths not listed. Please Note: 2-1/8" thickness is nominal dimension, actual will vary between 2-1/8" and 2-1/2". Note: The veneer layers are oriented so that the veneers are stacked 2-1/8 inches high. Said another way, on the 1-1/2" wide faces you will see a single veneer. If you need the veneers to be oriented the opposite way, you need to purchase a 2-1/4" square cross section and have us rip it for you. If none of this makes sense to you, please give us a call.
1-1/2" x 2-1/8" x 6" - $8.10
2"" cross section straight cut available in any length from 2" up to 30". Only prices of the most common lengths are listed. Please contact us for pricing on lengths not listed. Please Note: Although listed as 2" square, actual dimension is usually 2-1/4" square. On some material lots this is not possible, and actual cross section will be 2-1/4 x 2-1/8".
2-1/4" x 2-1/4" x 6" - Straight Cut $11.52 2-1/4 " square cross section SHALLOW ANGLE Cut:
2-1/4" cross section shallow
angle available in
any length from 2" up to 30". Only prices of the most common
lengths are listed. Please contact us for pricing on lengths not
listed. Please inquire for pricing on other lengths and sizes. Midnight Ebony is being phased out because of the high price of imported ebony veneer. We still have a limited supply of 1" thick stock and a few 1-1/2" x 1-1/2" sections up to 12" long.
|
Optional Predrilled and Rough Turned BlanksWe apologize for any inconvenience, but we no longer offer predrilling or preturning.
|
Questions? Please email us at
wood2@rrpwhite.com .
Click to subscribe to "Penturners"
Click to subscribe to "Turning and Talking"
